What is a Linoleum Glue?
Linoleum glue is a type of adhesive that is used to attach linoleum flooring to a concrete floor. Over time, this glue can become hard and difficult to remove. If you are trying to remove linoleum glue from a concrete floor, there are a few methods that you can use to loosen and remove the glue.
Things You Will Need Before Removing the Linoleum Glue?
- A putty knife
- A stiff brush
- Water
- Muriatic acid (optional)
Caution!
Muriatic acid is a corrosive substance. Be sure to wear gloves and eye protection when using it.
How to Remove Linoleum Glue from Concrete Floor?
- Test a small area with the putty knife to see if the glue will scrape off easily. If it does, proceed to step 2. If not, move on to step 3.
- Use the putty knife to scrape the glue off of the floor in small sections. Work slowly and carefully to avoid damaging the floor.
- If the glue is still not coming up, mix a solution of 1 part water to 1 part muriatic acid. Apply the solution to the glued area with a brush and let it sit for 5-10 minutes before scrubbing with the brush and scraping with the putty knife. Repeat as necessary until all of the glue is removed. If you are still facing any issue, below is the step by step guide.
Step-by-Step Guide
Assuming you want to know how to remove linoleum glue from a concrete floor, here is a step-by-step guide:
- Start by sweeping or vacuuming the floor to remove any loose dirt or debris.
- Next, using a putty knife or scraper, begin to scrape up as much of the glue as possible.
- Once you have removed as much of the glue as you can, it’s time to start dissolving what’s left. You can do this by using a commercial adhesive remover or by creating your own mixture of one part vinegar to one part water.
- Apply the vinegar solution (or commercial adhesive remover) to the glued areas and let it sit for several minutes.
- After a few minutes, begin scrubbing at the glued areas with a stiff brush. You may need to reapply the solution and let it sit for a few more minutes before scrubbing again.
- Continue this process until all of the linoleum glue has been removed from the concrete floor.
- Once all of the glue is gone, be sure to wash the floor with warm soapy water to remove any residue from the adhesive remover or vinegar solution.
Conclusion
There are a few different ways that you can remove linoleum glue from a concrete floor, but the most effective way is to use a solvent-based adhesive remover. solvent-based adhesive removers are designed to dissolve the glue so that it can be easily wiped away.